Papers:
Rapid Deposition of Graphene Layers in MxRAM Devices
A novel, scalable method is presented for depositing ultra-thin micro/nano-coatings to 20 nm, or particles < 2m/min. A lab bench process tool based on this technique was built and is shown, applied to the challenge [...]
Nanospray Combustion Processing Technology for Nanomaterials Fabrication
NanoSpray Combustion Processing technology is a flame based open atmosphere process for nanostructured thin film manufacturing through the Combustion Chemical Vapor Deposition (CCVD) mode. The main advantage of NanoSpraySM CCVD technique includes using inexpensive and [...]
Scalable Manufacturing of Nanopowders by Solution Combustion Processing
Venugopal G., Dressler D., Webster D., Johnson S., Stieha J., Brandenburg T., Hunt A., nGimat LLC, US
For the past several decades, gas-phase combustion processing has been used to produce nanomaterials like titanium dioxide and carbon-black in tonnage. These processes are restricted to the production of simple, single-element or single-metal compositions, primarily [...]
Production of Glass Nanofibers with tailored compositions by Laser Spinning
We present a new method developed in our group, Laser Spinning, for the production of very long amorphous ceramic nanofibers with lengths up to several centimeters. This technique allows large quantities of nanofibers to be [...]
Bacterial Cellulose Nanocomposites Developed by in-situ Fermentation
Osorio M., Restrepo D., Castro C., Montoya U., Zuluaga R., Gañán P., Universidad Pontificia Bolivariana, CO
Some bacteria such as Gluconacetobacter synthesize cellulose nanofibrills (BC) through the polymerization of glucose and subsequent extrusion outside the cell. In static conditions, the bacteria produce a three-dimensional network, a type of pellicule, which can [...]
Scalable Nanopatterning using Roll-based Jet and Flash Imprint Lithography
Ahn S., Ganapathisubramanian M., Miller M., Yang J., Choi J., Menezes M., Xu F., Hellebrekers P., LaBrake D., Resnick D.J., Sreenivasan S.V., Molecular Imprints, Inc, US
Large area roll-to-roll manufacturing on flexible substrates is ubiquitous for applications such as paper and plastic processing. It combines the benefits of high speed and inexpensive substrates to deliver a commodity product at low cost. [...]
Novel Nanostructured Coatings onto Particles by Atomic Layer Deposition, Their Method of Manufacture, and Feasibility of Scale and Economics
Atomic Layer Deposition (ALD) on particles can provide unique opportunities to control surface chemistry or create new composite materials. These techniques can create a wide variety of structures to suit many different commercial applications from [...]
A Low Cost, Modular and Reconfigurable Manufacturing Cell for Construction of Heterogeneous Micro-Nano Systems
This abstract presents a novel flexible manufacturing approach using modular robotic manipulators that can be quickly and easily configured for on-demand, on-site prototyping or pilot production. The modular and reconfigurable manufacturing cell or MRMC implements [...]
Journal: TechConnect Briefs
Volume: 1, Nanotechnology 2013: Advanced Materials, CNTs, Particles, Films and Composites (Volume 1)
Published: May 12, 2013
Industry sector: Advanced Materials & Manufacturing
Topic: Advanced Manufacturing
ISBN: 978-1-4822-0581-7