2007 NSTI Nanotechnology Conference and Trade Show - Nanotech 2007 - 10th Annual

Evaluation of Nanostructured Polymeric Coatings for Corrosion Protection

A. Aglan, A. Ludwick and M. Reeves
Michigan Tech, US

Keywords:
corrosion, EIS, epoxy

Abstract:
The effect of the addition of multi-walled carbon nanotubes (MWCNT) to epoxy and vinyl chloride/vinyl acetate copolymer coatings on their ability to protect the substrates was studied. Coatings were formulated from these resins with and without MWCNT reinforcement. Steel substrates were prepared and coated with each formulated coating and submerged in 5% NaCl solution to study effectiveness by means of Electrochemical Impedance Spectroscopy (EIS). In addition, thin films from these polymers, with and without nanoreinforcement, were cast. Dogbone specimens were cut in order to study their mechanical properties. Some of these specimens were immersed in the NaCl solution for two weeks in order to compare their mechanical properties with samples not exposed to salt water. Optical microscopy was used to capture the progress of sample corrosion. EIS measurements showed that the addition of MWCNTs to epoxy and VYHH coatings increased their charge transfer resistance in comparison with the neat coatings. This is an indication of the enhanced corrosion protection of the nanocoatings. In addition, mechanical strength tests, both before and after immersion in 5% NaCl solution, showed that thin films from both epoxy and VYHH resins containing MWCNTs had improved strength, an indication of an improvement in the coatings’ cohesive properties.

Back to Program

Sessions Sunday Monday Tuesday Wednesday Thursday Authors Keywords

Nanotech 2007 Conference Program Abstract

 
 

Names, and logos of other organizations are the property of those organizations and not of NSTI.
This event is not open to the general public and NSTI reserves the right to refuse admission and participation to any individual.